Close

Shopping List

Shopping List

  Our Locations

  Our Locations  



P2D4-10

P2D4-10

Main Features

Specifications

Inventory

Main Features

Main Features

The Rockford Fosgate P2 10” subwoofer continues “The PUNCH” tradition. The P2D4-10 features a Dual 4-Ohm voice coil, 300 Watts RMS power handling, and can accommodate a grille insert using the included cast aluminum trim ring.

CEA-2031

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.

Klippel Verified

Klippel Verified

Klippel is a speaker certification program allowing us to deliver the best possible subwoofers. To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be trained and certified by Klippel prior to using the three separate Klippel systems to design, develop and test: - Klippel DA-2 (Designed) - Klippel PM-8 (Developed) - Klippel QC (Tested) Rockford Fosgate has made the investment in Klippel to deliver the best possible subwoofers to our customers.

Stitched Tinsel Leads

Stitched Tinsel Leads

Improved reliability and performance by reducing fatigue and possible shorting. Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and strain over a greater area, significantly improving the reliability and performance of the subwoofer. These stitched tinsel leads withstand extreme duty cycles, fatigue and high current that is critical to robust design.

VAST Surround - Subs

VAST Surround - Subs

The Vertical Attach Surround Technique significantly increases a subwoofer's effective radiating cone area up to 25%. Rockford Fosgate's proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective radiating cone area without complicated installation issues. This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing), which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved.

FlexFit Basket - Subwoofer

FlexFit Basket - Subwoofer

The slot mounted frame pattern allows fine-tuning of the subwoofer's mounting position. The slot mounted frame pattern of the FlexFit basket utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted.

IMPORTANT: Images may not reflect actual product.

Specifications

General
Maximum Power 600 W
RMS Power 300 W
Sensitivity 84 dB
Frequency Response 30.8 Hz - 250 Hz
Mounting Diameter 9.13 inch(es) / 23.19 cm
Mounting Depth 5.92 inch(es) / 15.04 cm
Additional Information • Dual 4-Ohm
• Dual linear spider with embedded 16 AWG tinsel leads
• Custom 10-AWG nickel plated push terminals
• Extended pole piece and bumped vented backplate
• High-temp voice coil with spun-laced Nomex® re-inforcement collar
• Protective PVC textured magnet cover
• Kevlar fiber reinforced paper cone
• StampCast basket with integrated spider venting
• Diamond cut cast aluminum trim ring with optional grille
Shipping Dimensions
Weight 13.6 lb(s) / 6.17 kg
Warranty
Warranty 1 Year
UPC
UPC# 613815586524

Inventory

This item is not available for pick-up in stores.