Audiofrog 6 X 9 Inch Premium Grade Automotive Woofer/Midrange Loudspeaker - GS690
GS690
Designed to be used in two- or three-way systems, the GS690 includes a non-resonant injection-molded ABS plastic and fiberglass vented basket. For a 2-Way system, use a GS10 tweeter and a GS610C crossover. You can also use the GS690 with a GS42 and an active crossover, or with a GS10, GS40 and GS410C with an active crossover between the GS690 and GS40.
The 1” copper voice coil wound on a Kapton® former provides high power handling. A parabolic propylene cone ensures long-term reliability and provides the right compromise between compliance and stiffness for flatter high frequency response. The ferrite motor includes a neodymium bucking magnet atop the pole piece for increased motor strength and sensitivity. Terminals are secured by a small PC board integrated into the inside of the basket.
Features
- Proprietary injection molded vented ABS and fiberglass basket
- 1″ (25mm) copper voice coil on Kapton® former
- Ferrite motor with extended polepiece for magnetic field symmetry
- Parabolic propylene cone
- Flat progressive Nomex® spider
- Nitrile butadiene rubber surround
- Fast-on terminals secured with integrated PC board
| Specifications: | |
|---|---|
| Recommended Low Pass Filter Frequency and Slope: | ≤ 3.5 kHz, ≥ 12 dB/oct |
| RMS Power Handling: | 100 W |
| Peak Power Handling: | 300 W |
| Frequency Response (-3 dB): | 42 Hz – 5 kHz |
| Sensitivity (2.83 V/1 M): | 92 dB |
| Recommended Amplifier RMS Power Range: | 15 W – 100 W |
| Nominal Impedance: | 4Ω |
