JBL 21" Bluetooth Universal Outdoor Vehicle Soundbar - JBLRALLYBAR2BLK
JBLRALLYBAR2BLK
Upgraded Dynamic LED Lights That Dance to Your Beat
Brighten every ride with vivid, beat‑driven lighting effects that energize your off‑road adventure. Use the bottom‑panel controls to fine-tune the perfect mood.
IP67 Rated Water and dust Resistant
IP67 rated water resistant protects soundbar speakers from dust ingress and powerful water jets.
JBL Legendary Sound gets an AI Sound Boost
Hit the trail with massive sound and deep, punchy bass. AI Sound Boost automatically fine-tunes your music in real time for peak power and crystal-clear performance-even outdoors at full volume.
Support Bluetooth®, USB Disk and RCA Input Audio Source Play
RALLYBAR 2 can detect the audio source automatically according to the source priority definition: USB disk >Bluetooth®> RCA-IN audio source. Higher priority source can break-in Lower priority audio source.
3 Different Gain Settings
RALLYBAR 2 Offers 3 different Gain settings when connected by RCA audio:2V, 4V, and 6V.
150Wrms Class-D Amplifier Built-in
The 150Wrms (THD <1%) Class- D amplifier ensures powerful, high quality JBL Original Legendary Sound when you take the wheel or helm.
Multi-speaker connection by Auracast
Expand your sound experience. Easily pair two RALLYBAR 2 speakers for true stereo or connect multiple JBL Auracast-enabled speakers wirelessly-perfect for larger parties or multi-vehicle setups.
Innovative Mounting Kits Design
The innovative mounting kits design (patent pending), offers multiple position combinations on top and back to accommodate a variety of installation requirements.
Lighter Build
The RALLYBAR 2 is nearly 1 kg lighter than Gen 1, making it easier to handle, transport, and install. This weight reduction, achieved through an upgraded sound system design, delivers greater convenience without compromising durability or performance.
| General Specifications | |
|---|---|
| Transducers | 4x 2.75”(70mm) woofers; 2x 1”(25mm) Tweeters;2 x 7.2"(182.8mm)x3"(76.2mm)Racetrack Passive Radiators |
| Output Power | 150WRMS;300W PEAK |
| THD at Rated RMS Power | <1% |
| Frequency response | 45Hz-20kHz |
| Bluetooth® Version | 5.4 |
| Voltage Range: | 9 - 16VDC |
| Quiescent Current Draw: | <0.9A |
| Maximum Current Draw: | 25A |
| Signal-to-noise Ratio: | > 80 dB |
| Cable type: | 12AWG. |
| Cable length: | 12 Feet (3.66m) |
| Bluetooth® profile: | A2DP V1.4, AVRCP V1.6 |
| Bluetooth® transmitter frequency range: | 2400 MHz – 2483.5 MHz |
| Bluetooth® transmitter power: | ≤ 15 dBm (EIRP) |
| RCA: | 2Vrms(0.35Vrms - 2Vrms);4Vrms(0.7Vrms - 4Vrms);6Vrms(1.05Vrms - 6Vrms) |
| USB format: | FAT16, FAT32,EXFAT |
| What's in the box? | |
| What's in The Box? | 1x Soundbar 2x Security cables 1xSmall Wrench 1 x L- Small Allen wrench 1xT-handle hex wrench 2x Straps with Velcro 1X G -Clamp 1x Keychain 1x 12ft (3.66m) power/ground wire harness 2x Rubber top covers 2x Mount cleats 2x Short M8 screws 2x Short M5 screws 2x Long M5 screws 2x M5 screw nuts 4X Flat washers 2X C -Clamps (2" ) 2X C -Clamps (1.75" ) 2X Thick rubber strips (for 1.5" pole ) 2x Thin rubber strips (for 2" &1.75" pole) 1x Quick start guide 1x Safety sheet &warranty card |
