Literature
The KICKER® KM 10-inch Marine Subwoofer makes waves of its own in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bang in your boat.
Packed with features and made for specifically for marine use, KICKER gives you the deep, loud bass your boat needs.
FEATURES
- Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded Santoprene® Surround
- UniPlate™ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
| Specifications | |
|---|---|
| Woofer(in,mm) | 10, 25 |
| Impedance (OHMS) | 4 SVC |
| Peak Power Handling(Watts) | 350 |
| Continuous Power Handling(Watts RMS) | 175 |
| Sealed Enclosure Volume Min-Max(ft³, L) | 1-2.4, 28.3-68 |
| Vented Enclosure Volume Min-Max(ft³, L) | 1.25-1.75, 35.4-49.6 |
| Frequency Response(Hz) | 30-500 |
| Mounting Depth(in, cm) | 5, 12.7 |
| Hole Diameter(in, cm) | 9-3/16, 23.2 |
| Outer Diameter(in, cm) | 10-11/16, 27.1 |
| What's in the Box: | 1 - 10" Woofer, 1 - Back gasket, 8 - Mounting screws, 8 - Mounting screw clips, 1 - Manual |
