Alpine Complete 9-Speaker Powered System Upgrade Package - PSS-24WRA

Save $40000
as low as
Per month over
12 months.

Online Only



Get 300-Watts of powerful, top-off sound in your 2018 - Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator


  • Complete, five-channel powered sound system upgrade package
  • Compatible with four-door, non-amplified 2018 - Up Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator
  • Also compatible with two-door, non-scissor front seats in 2019 - Up Jeep® Wrangler
  • Includes Alpine’s SPV-65X-WRA, SPV-65-JLT, PWE-S8, and KTP-445U
  • 180W, 4-channel Power Pack amplifier
  • 120W, 8” powered subwoofer
  • (2x) 6.5” weather-resistant mid-bass drivers
  • (2x) 1” weather-resistant teteron dome tweeters with vehicle-specific connectors and crossovers
  • Vehicle specific front speaker pods with vehicle-specific connectors
  • Tweeter adapter plates allow for use of the original factory tweeter locations
  • SPV-65-JLT weather-resistant rear soundbar speaker system
  • Rugged, premium grills designed to emulate the factory look and appeal
  • Vehicle-specific connectors for plug-and-play speaker installation 
  • Utilizes factory bolt locations
  • Durable stamped, steel frame speaker basket design
  • Includes template for mounting
  • Vehicle specific T-harness for installation with OEM radio into compatible 2018 – Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator vehicles
  • Vehicle specific mounting brackets allow for the powered sub and amp to be secured under the passenger seat without drilling

What's in the Box:

  • KTP-445U Universal 4-Channel Power Amplifier
  • PWE-S8 8" Compact Powered Subwoofer
  • SPV-65X-WRA Front Component Speakers
  • SPV-65-JLT Rear Sound Bar Speakers
  • ALP-POD-JLT Front Speaker Pod
  • PSU-BKT-JL-R PWE Right Bracket JL
  • PSU-BKT-JL-L PWE Left Bracket JL
  • ALP-HRN-PSU300 PSU Power Harness
  • ALP-THRN-CH2 Chrysler T-Harness
  • CT6 6" Cable Ties
  • PHPSM412 Pan Head Phillips Screw M4x12
  • SLWM4 M4 Split Lock Washers
  • PHSCR832 8-32 Pan Head Phillips screws
  • PSS-WRA-IM Installation Manual


Your Jeep® begs for top-off drives, whether cruising down the highway or weaving through trails, so you need a sound system that delivers music for all your adventures. The PSS-24WRA is a 300-Watt Complete Sound System Upgrade Package for the four-door, non-amplified 2018 – Up Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator.


Go beyond your wildest expectations for sound with this complete sound upgrade package. The PSS-24WRA has 5-channels of powered sound that replaces your factory system. The package includes two sets of 6.5” weather-resistant mid-bas drivers and 1” weather-resist tweeters that replace the front and rear soundbar factory speakers, an 8” powered, compact subwoofer and a 4-channel power pack amplifier.

Tuned for Jeep®

The PSS-24WRA sound system is tuned for the unique cabin environment of the 2018 - Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator. The weather-resistant speakers are designed for powerful, top-off performance that’s unhindered by weather, wind, or other noise while driving. The 6.5” mid-bass drivers bring out the full potential of your sound, while the tweeters capture the high frequencies often lost in music reproduction. The 8” compact subwoofer adds deep, accurate bass that grounds your sound system.

Plug-and-Play Installation

Vehicle-specific speaker connectors and pods designed for the 2018 - Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator are included for plug-and-play installation. Tweeter adapter plates use the original factory tweeter locations to take the guesswork out of installation. Vehicle-specific mounting brackets are included to secure the 8” compact subwoofer and 4-channel amplifier under the passenger seat without drilling.

System Compatibility

The PSS-24WRA is compatible with the i407-WRA-JL 7-Inch Multimedia Receiver and X409-WRA-JL 9-Inch Weather-Resistant Navigation System with Off-Road Mode. The PSS-24WRA also includes a vehicle-specific T-harness for installation with the factory radio into compatible four-door, non-amplified NEW 2018 – 2020 Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator.

Powered Subwoofer (PWE-S8)
Frequency response32 - 150Hz
Rear (SPV-65-JLT)
Nominal impedance4 ohms
Frequency response50kHz – 22kHz
Power handling90 watts RMS (270 watts peak)
Front (SPV-65X-WRA)
Nominal impedance4 ohms
Frequency response65kHz – 22kHz
Power handling75 watts RMS (225 watts peak)

Write a review

Powered by Apex eCommerce Global Retail Operating Systems with Product Catalog