Literature
High-end Class D amplifier.
- Direct mode available for quality active amplification.
- Thermo-controlled ventilation. Compatible with High-Cap.
- Compatible with High-Cap.
EXCEPTIONAL COMPONENTS
The FPS 1500 amplifier is equipped with a remote control for adjusting the volume and muting the subwoofer.
Other advantages: the FPS 1500 can be used in direct mode, it is stable at 1 Ohm, and it also has a 100% MOSFET schema.
REVEAL THE FULL DYNAMICS OF YOUR CAR AUDIO SYSTEM
Focal recommends connecting the optional High Cap module to your FPS 1500. This external power supply module increases operating current capacity to take full advantage of your system’s dynamics, and to give you full control of your speaker drivers, regardless of your power requirements.
| Specifications | |
|---|---|
| Distortion into 4 Ohms @1kHz (with 22kHz low-pass | - |
| Distortion into 4 Ohms @1kHz (with 22kHz low-pass | - |
| Signal/noise ratio (@CEA power) | 87dBA |
| Signal/noise ratio (@CEA power) | 87dBA |
| Frequency response (-1dB) in direct mode | 10Hz - 2.5kHz |
| Frequency response (-1dB) in direct mode | 10Hz - 2.5kHz |
| RMS power in bridged mode - 14.4V 2Ω - THD+N < 1% | - |
| RMS power in bridged mode - 14.4V 2Ω - THD+N < 1% | - |
| RMS power in bridged mode - 14.4V 4Ω - THD+N < 1% | - |
| RMS power in bridged mode - 14.4V 4Ω - THD+N < 1% | - |
| RMS power - 14.4V 1Ω - THD+N < 1% | 1 x 800W |
| RMS power - 14.4V 1Ω - THD+N < 1% | 1 x 800W |
| RMS power - 14.4V 2Ω - THD+N < 1% | 1 x 550W |
| RMS power - 14.4V 2Ω - THD+N < 1% | 1 x 550W |
| RMS power - 14.4V 4Ω - THD+N < 1% (CEA 2006) | 1 x 325W |
| RMS power - 14.4V 4Ω - THD+N < 1% (CEA 2006) | 1 x 325W |
| Distortion into 4 Ohms @100Hz (with 22kHz low-pass) | < 0.15% between 5 and 270W |
| Distortion into 4 Ohms @100Hz (with 22kHz low-pass) | < 0.15% between 5 and 270W |
| Crosstalk (@ 1kHz - 10V - 4 Ohms) | - |
| Crosstalk (@ 1kHz - 10V - 4 Ohms) | - |
| Damping factor into 4 Ω at 100Hz | 220 |
| Damping factor into 4 Ω at 100Hz | 220 |
| Input sensitivity | 0.2V - 5.2V |
| Input sensitivity | 0.2V - 5.2V |
| High-pass crossover | - |
| High-pass crossover | - |
| Low-pass crossover | 50Hz - 500Hz |
| Low-pass crossover | 50Hz - 500Hz |
| Bandpass crossover | - |
| Bandpass crossover | - |
| Subsonic crossover | Variable from 20 to 50Hz (24dB/oct.) released |
| Subsonic crossover | Variable from 20 to 50Hz (24dB/oct.) released |
| Direct mode | Yes |
| Direct mode | Yes |
| Bass boost level | 0/+9dB linear |
| Bass boost level | 0/+9dB linear |
| Bass Boost center frequency | 45Hz |
| Bass Boost center frequency | 45Hz |
| Variable phase (SUB) | 0-180° linear |
| Variable phase (SUB) | 0-180° linear |
| Remote control | Yes |
| Remote control | Yes |
| Protections | Short-circuit Thermal overload (76°C) Soft clipping High voltage Polarity reversal |
| Protections | Short-circuit Thermal overload (76°C) Soft clipping High voltage Polarity reversal |
| Dimensions (H x L x D) | 59 x 353 x 254mm |
| Dimensions (H x L x D) | 59 x 353 x 254mm |
