Kenwood Compact 4 Channel Digital Amplifier - KAC-M3004

$329⁰⁰

as low as
$54.83

Per month over
6 months.

Apply Now

Quote Request

Online Only

KAC-M3004
Best Deal Promise

Description
Features

General Features

RMS POWER Output 4Ω: 50W x 4
RMS POWER Output 2Ω: 75W x 4
RMS POWER Output Bridged: 150W x 2
Dimensions(WxHxD): 6-1/2" x 1-3/4" x 3-7/8"
Singal Sensing Turn-on
Conformal Coating *1

*1: Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

MULTI-APPLICATION
Many of today’s powersports have very limited space to work in and tend to be a harsh environment for electronics because of the exposure to outdoor environments. KENWOOD’s compact performance amplifiers are small in size so they fit even the most limited installation areas. The amplifiers also use a conformal coated main PCB (printed circuit boards) which offer extra layers of protection to help prevent moisture or damp air from damaging the product.

General
Operating Voltage	14.4V（11-16V allowable）
Dimensions(WxHxD)	'6-1/2 X '1-3/4 X '3-7/8 inch
Weight(kg)	-
Terminals
Line In	RCA (Ni)
Speaker Output	MOLEX Connector with AWG16 200mm Wire
Battery & Ground	Screw Type Terminal Block (Ni) (M4)
AUDIO SECTION
Speaker Level Input Sensitivity	4.0 V - 12.0 V
RCA Input Sensitivity	0.2 V - 5.0 V
Filter Selector 1	LPF-OFF-HPF
High-Pass Filter	Built in Variable Low-Pass Filter (50Hz-200Hz, -12dB/oct)
Low-Pass Filter	Built in Variable Low-Pass Filter (50Hz-200Hz, -12dB/oct)
Specifications
Speaker Impedance	4Ω (2Ω to 8Ω allowable)
Bridged connection	4Ω to 8Ω allowable
Input Impedance	10k ohm
Frequency Response	20Hz-20kHz (+0dB, -1dB)
Signal to Noise Ratio	89dB (Reference: Rated Power into 4Ohms at 14.4V)
Maximum Power Output
Maximum Power Output	600W
CEA-2006 Primary Ratings
Signal-to-Noise Ratio	76dBA (Reference: 1Watt into 4Ohms)
Power Output	50 Watts RMS x 4 at 4 Ohms and ≤1%THD+N
General
Current Consumption	22 A