The PRIME R600X5 is a 5-channel amplifier designed to run an entire car audio system! The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms.
The Prime R600X5 amplifier produces up to 75 Watts into each of its 4-channels plus 300 Watts into a dedicated 5th (subwoofer) channel. This 5-channel design makes it the perfect amplifier when you want one amplifier to run it all! The Prime series offers quality and power from Rockford Fosgate at a great price. Car Audio Fanatics rock out!
- RCA and High level Input with 2/4/5 Channel Select
- 12dB/octave Butterworth crossover
- On Board Punch EQ Control
- Remote PLC (Punch Level Control) - Sub Channel
- Separate Front, Rear and Sub Gain Control
- Real time output and power supply thermal sensing
- Cast aluminum heatsink
- 4 Gauge power/ground connectors
- MOSFET power supply
- Over current protection
- Short circuit protection
- Muted turn on
- 1 Year Warranty
Technologies
Class-A/B
An amplifier topology with the best of both worlds; a Class-A preamp and Class-B output stage.
CE Compliant
This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
Class-D
High efficiency amplifier design that reduces current consumption from the charging system.
CTA-2006 Compliant
Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
| Specifications | |
|---|---|
| Number of Channels | 5 |
| Total Power (Sum of Rated Power) | 600 Watts RMS |
| Rated Power (RMS Continuous Power) | 50 Watts x 4 @ 4-Ohms + 200 Watts x 1 @ 4-Ohms , 75 Watts x 4 @ 2-Ohms + 300 Watts x 1 @ 2-Ohms |
| Dynamic Power (PVC/PowerCube®) | 58 Watts x 4 @ 4-Ohms 0° Res + 216 Watts x 1 @ 4-Ohms 0° Res , 95 Watts x 4 @ 2-Ohms 0° Res + 409 Watts x 1 @ 2-Ohms 0° Res |
| Bridgeable | Yes |
| Frequency Response | 20Hz - 20kHz +/-1dB |
| Input Sensitivity | 450 mV - 12 V |
| Circuit Topology Class | Class A/B + Class D (Sub) |
| Efficiency (average) | Front/Rear: 64% @ 4-Ohm Sub: 85% @ 4-Ohm |
| Total Harmonic Distortion (THD+Noise) | Front/Rear 4-Ohm: <1.0% , Front/Rear 2-Ohm: <1.0% , Sub 4-Ohm: <1.0% , Sub 2-Ohm: <1.0% |
| Signal Input | High Level: 2 x 4-pin MOLEX , Low Level: 3 Pair RCA |
| Signal Output | - |
| Tone Controls | Front/Rear: 0dB/+6dB/+12dB @ 45Hz , Sub: Variable 0dB to +12dB @ 45Hz , Sub: 0°/180° Phase Control |
| Crossover Controls | Front/Rear: High-Pass/Low-Pass 50-250Hz , Sub: Low-Pass variable 50Hz - 250Hz |
| Remote Controls | Punch Level Control (when connected, is linked to "gain control" to provide remote output level) |
| Visual Indicators | Power Protect |
| Power Wire Gauge | 4 AWG |
| Power Input Connector | Screw Terminal |
| Speaker Wire Gauge | 8 AWG |
| Speaker Output Connector | Screw Terminal |
| Cooling | Convection |
| Heatsink | - |
| Operating Voltage | 9 - 16 VDC |
| Recommended Fuse (not included) | 80 A |
| Average Current Draw (13.8V Music) | 35 A |
| Max. Current Draw (13.8V Sinewave) | 70 A |
| Suggested Alternator | 75 A |
| Dimensions (H x W x D) | 1.98" x 6.77" x 13.19" (5cm x 17.2cm x 33.5cm) |
| Shipping Weight | 9.5 Lbs. (4.30 Kg.) |
